Optimize your water purification system with Thermo Scientific™ Barnstead™ RO and TII Accessories and Consumables. For use with Barnstead RO and TII water purification systems, these products include filters and pre-filters, cartridges, overflow cutoff float and pump interlock cable, as well as dispensers and printer.
Sold out
Barnstead™ RO and TII Accessories and Consumables
Price range: $0.00 through $1,267.00
Optimize your water purification system with Thermo Scientific™ Barnstead™ RO and TII Accessories and Consumables. For use with Barnstead RO and TII water purification systems, these products include filters and pre-filters, cartridges, overflow cutoff float and pump interlock cable, as well as dispensers and printer.
Description
Additional information
| Conductivity |
0.055 µS/cm |
|---|---|
| Bacterial Content |
<1 CFU/mL |
| Feed Water Monitoring |
No |
| Feedwater Source |
Pretreated |
| Product Water Type |
Type 2 |
| Resistivity |
15 Mohm.cm at 25°C |
| TOC Monitor with UV Intensity Monitoring |
No |
| Total Organic Carbon |
1 to 5 ppb |
| Type |
UV Lamp for Storage Reservoir, Ultrapure Filter, 1/2 Size, Filter, 0.22 Micron, Oxygen Filter, Control Panel Mounting Assembly, Dispense Overflow Cutoff Float, Pump Interlock Cable, Remote Dispenser, Volumetric Remote Dispenser, Pre-filter |
| Feedwater Pressure |
30 to 100 psig (2 to 6.9 bar) |
| Feedwater Temperature (Metric) |
4°C to 40°C |
| For Use With (Equipment) |
Barnstead™ TII Type 2 Water System, Barnstead Water Purification Systems, Barnstead RO, Barnstead TII, Barnstead RO, Barnstead TII |
| Particles >0.2µM/mL |
<1 μM/mL |
| Purified Water Flowrate Field |
1 L/min. |
| RO Flow Rate |
12 L/hr. |
| Width (English) |
13.5 in. |
| Height (English) |
19.5 in. |
| Height (Metric) |
49.5 cm |
| Depth (English) |
18.5 in. |
| Depth (Metric) |
47 cm |
| Electrical Requirements |
100/240 VAC 50/60 Hz |
| Unit Size |
Each, Each |
Reviews (0)
Shipping & Delivery
Related products
Сatalog number:
D8611
Barnstead™ Easypure™ II
Сatalog number:
061278
Cabinet Softening System WAE
Single softening cabinet systems have time control and are specially designed for discontinuous use. Ideal for laboratory point-of-use water purification systems, the Thermo Scientific™ Cabinet Softening System WAE is ready-to-connect, and softens feed water before feeding a reverse osmosis system. By removing hard ions, such as calcium and magnesium, the softened water extends the life of the reverse osmosis membrane.
Сatalog number:
50132132
Barnstead™ Pacific TII Water Purification System
Convert tap water into Type 2, high purity water with the automatic and cost-efficient Thermo Scientific™ Barnstead™ Pacific TII Water Purification System. This system supports daily requirements from 20 to 200 liters. It removes approximately 98% of inorganic ions and 99% of all dissolved organic substances, as well as microorganisms and particles, with its high performance, reverse osmosis membrane.
Сatalog number:
50146378
Dionex™ IC Pure™ Water Purification System
The Thermo Scientific™ Dionex™ IC Pure™ water purification system brings reagent-free ion chromatography to the next level by producing ultrapure water used in the analysis of anions, cations, organic acids, carbohydrates, and amines in water samples. This system has been engineered to remove impurities that threaten your results so you can focus on what is important – the sensitivity and resolution of your ion chromatography analysis. Additionally, the Dionex IC Pure water purification system provides ultrapure water to the entire Dionex RFIC product line.
Сatalog number:
50157886
Barnstead™ Pretreatment for Point of Use Water Purification Systems
Сatalog number:
50157882
Barnstead™ Smart2Pure™ Pro Water Purification System
Сatalog number:
50155482
Reverse Osmosis Systems RO 100-350 RDS
Produce product water that is less than 0.1µS/cm. Thermo Scientific™ Reverse Osmosis RO 100-350 RDS systems features an integrated ion exchanger, storage tank and pressure pump in a dust-proof cabinet. These systems are ideal supplier of high purity water for analyzers, as well as for general laboratory purposes according to international quality-standards like CLSI. The quality of the high purity water supplied by reverse osmosis is not sufficient when a conductivity below 1μS/cm is required. For such cases, the combination of reverse osmosis with ion exchanger is necessary.
Сatalog number:
50131952
Barnstead™ GenPure™ Pro Water Purification System
Produce Type 1 ultrapure water while conserving space with the compact and flexible Thermo Scientific™ Barnstead™ GenPure™ Pro Water Purification System. Suitable for the most demanding laboratory applications, this system delivers 18.2 megohm-cm water with consistent quality. Gain flexibility with the dispenser that reaches up to 24″ (60cm) from the unit. It can be used on a laboratory bench or on a wall. Integrated feed water monitoring helps to maximize cartridge life. Easily change cartridges within seconds with Aquastop quick-connects.
Reviews
There are no reviews yet.