Optimize your water purification system with Thermo Scientific™ Barnstead™ RO and TII Accessories and Consumables. For use with Barnstead RO and TII water purification systems, these products include filters and pre-filters, cartridges, overflow cutoff float and pump interlock cable, as well as dispensers and printer.
Sold out
Barnstead™ RO and TII Accessories and Consumables
$0.00 – $1,267.00
Optimize your water purification system with Thermo Scientific™ Barnstead™ RO and TII Accessories and Consumables. For use with Barnstead RO and TII water purification systems, these products include filters and pre-filters, cartridges, overflow cutoff float and pump interlock cable, as well as dispensers and printer.
Description
Additional information
| Conductivity |
0.055 µS/cm |
|---|---|
| Bacterial Content |
<1 CFU/mL |
| Feed Water Monitoring |
No |
| Feedwater Source |
Pretreated |
| Product Water Type |
Type 2 |
| Resistivity |
15 Mohm.cm at 25°C |
| TOC Monitor with UV Intensity Monitoring |
No |
| Total Organic Carbon |
1 to 5 ppb |
| Type |
UV Lamp for Storage Reservoir, Ultrapure Filter, 1/2 Size, Filter, 0.22 Micron, Oxygen Filter, Control Panel Mounting Assembly, Dispense Overflow Cutoff Float, Pump Interlock Cable, Remote Dispenser, Volumetric Remote Dispenser, Pre-filter |
| Feedwater Pressure |
30 to 100 psig (2 to 6.9 bar) |
| Feedwater Temperature (Metric) |
4°C to 40°C |
| For Use With (Equipment) |
Barnstead™ TII Type 2 Water System, Barnstead Water Purification Systems, Barnstead RO, Barnstead TII, Barnstead RO, Barnstead TII |
| Particles >0.2µM/mL |
<1 μM/mL |
| Purified Water Flowrate Field |
1 L/min. |
| RO Flow Rate |
12 L/hr. |
| Width (English) |
13.5 in. |
| Height (English) |
19.5 in. |
| Height (Metric) |
49.5 cm |
| Depth (English) |
18.5 in. |
| Depth (Metric) |
47 cm |
| Electrical Requirements |
100/240 VAC 50/60 Hz |
| Unit Size |
Each, Each |
Reviews (0)
Shipping & Delivery
Related products
Сatalog number:
061278
Cabinet Softening System WAE
Single softening cabinet systems have time control and are specially designed for discontinuous use. Ideal for laboratory point-of-use water purification systems, the Thermo Scientific™ Cabinet Softening System WAE is ready-to-connect, and softens feed water before feeding a reverse osmosis system. By removing hard ions, such as calcium and magnesium, the softened water extends the life of the reverse osmosis membrane.
Сatalog number:
50155482
Reverse Osmosis Systems RO 100-350 RDS
Produce product water that is less than 0.1µS/cm. Thermo Scientific™ Reverse Osmosis RO 100-350 RDS systems features an integrated ion exchanger, storage tank and pressure pump in a dust-proof cabinet. These systems are ideal supplier of high purity water for analyzers, as well as for general laboratory purposes according to international quality-standards like CLSI. The quality of the high purity water supplied by reverse osmosis is not sufficient when a conductivity below 1μS/cm is required. For such cases, the combination of reverse osmosis with ion exchanger is necessary.
Сatalog number:
D13321
Barnstead™ Easypure™ RoDi
Сatalog number:
D8611
Barnstead™ Easypure™ II
Сatalog number:
AY1406X3
Accessories for the Barnstead™ TII Type 2 Water System
Сatalog number:
50132396
Barnstead™ LabTower™ EDI Water Purification System
Stock high purity water safely and conveniently with the integrated 100L reservoir of the Thermo Scientific™ Barnstead™ LabTower™ EDI Water Purification System. This system combines purification with EDI technology and storage in one. Conveniently dispense Type 1 water directly from the system while Type 2 water is accessible from the reservoir, an ideal supply for lab equipment. Free up bench space with this mobile free-standing unit that can be easily relocated with bottom-mounted rollers.
Сatalog number:
50136172
Barnstead™ GenPure™ xCAD Plus Ultrapure Water Purification System
Gain flexibility in the lab with the Thermo Scientific™ Barnstead™ GenPure™ xCAD Plus Ultrapure Water Purification System. Its advanced technologies allow for simultaneous dispensing from up to three remote dispensers for ease of use in shared laboratory environments. This lab water system comes with leak detection, electronic dispensing for fully automatic volume control and feed water monitoring that alerts users to fluctuations in the feed water quality. All consumables needed for start-up come with the system, allowing for simple ordering and setup.
Сatalog number:
50157882
Reviews
There are no reviews yet.