Features: Each system produces ultrapure water that exceeds the quantitative specifications of Type 1 water as described in ASTM™ D1193, ISO 3696, and CLSI-CLRW. Three cartridges in series provide increased capacity over similar systems. A 0.2μm final filter at the point of use provides water free of particles and bacteria. Quiet pump provides optimal flowrates and silent operation. Standby mode recirculates purified water during inactivity to ensure purity and allows for on-demand use. All components are constructed of inert materials, ensuring maximum ionic and organic purity. Supplied wall bracket allows increased flexibility when choosing a location. Integral low water and low pressure pump protectors protect the pump in the event feedwater is interrupted to the system. Easypure II: Base unit For buffer prep, titration, solutions, AA TOC 5 to 10ppb Easypure II UV: Ultralow organics For HPLC, TOC, GC/MS TOC 1 to 5ppb Easypure II UFI: Eliminates pyrogens For cell and tissue culture, monoclonal antibody production, electrophoresis TOC 5 to 10ppb Easypure II UV: Lowest levels of organics, pyrogens and nucleases For PCR 2-D electrophoresis, cell culture, blotting TOC 1 to 5ppb Ordering Information: Optional accessories include Remote Dispenser (0903515) and replacement consumables (UV lamps, ultrafilters and cleaning syringe); order separately. Contact your Sales Representative for details. Includes: Wall mounting bracket, cleaning syringe, UV lamp (Easypure II UV and UV/UF only), ultrafilter (Easypure II UF and UV/UF only). Requires: Cartridges and filters Recommended for: HPLC ICP GC/MS Cell and tissue culture PCR Note: Feedwater must be pre-treated by reverse osmosis, distillation or deionization
Product was successfully added to quote request.View Your Quote Cart
Barnstead™ Easypure™ II
$0.00
This product has been discontinued. For additional information or alternate products please contact your sales representative. The recommended replacement for this product is
Сatalog number:
D8611
Category: Water Purification Systems
Description
Additional information
Certifications/Compliance |
CE, CSA |
---|---|
Conductivity |
0.055 µS/cm |
Bacterial Content |
<1 CFU/mL |
Endotoxin Concentration |
0.001 EU/mL |
Feed Water Monitoring |
No |
Feedwater Source |
Pretreated |
Flow Rate |
Up to 1 L/min., 1 L/min. |
Product Water Type |
Type 1 |
Resistivity |
18.2 Mohm.cm at 25°C |
TOC Monitor with UV Intensity Monitoring |
No |
Total Organic Carbon |
1 to 5 ppb, 0 to 10 ppb, 5 to 10 ppb |
Type |
Water Purification System |
Feedwater Pressure |
100 psig (6.9 bar) |
Feedwater Temperature (Metric) |
4°C to 40°C |
Model |
UV/UF model, RF model, RF/UV model, Line feed (LF) model, UV model, UF model |
Particles >0.2µM/mL |
<1 μM/mL |
Voltage |
100/240 V |
Frequency |
50/60 Hz |
Unit Size |
-, 50/60 Hz |
Electrical Requirements |
100/240 VAC 50/60 Hz, 100/240 V 50/60 Hz |
Reviews (0)
Be the first to review “Barnstead™ Easypure™ II” Cancel reply
Shipping & Delivery
Related products
Сatalog number:
50136172
Barnstead™ GenPure™ xCAD Plus Ultrapure Water Purification System
$0.00 – $14,026.00Price range: $0.00 through $14,026.00
Gain flexibility in the lab with the Thermo Scientific™ Barnstead™ GenPure™ xCAD Plus Ultrapure Water Purification System. Its advanced technologies allow for simultaneous dispensing from up to three remote dispensers for ease of use in shared laboratory environments. This lab water system comes with leak detection, electronic dispensing for fully automatic volume control and feed water monitoring that alerts users to fluctuations in the feed water quality. All consumables needed for start-up come with the system, allowing for simple ordering and setup.
Сatalog number:
061278
Cabinet Softening System WAE
$0.00
Single softening cabinet systems have time control and are specially designed for discontinuous use. Ideal for laboratory point-of-use water purification systems, the Thermo Scientific™ Cabinet Softening System WAE is ready-to-connect, and softens feed water before feeding a reverse osmosis system. By removing hard ions, such as calcium and magnesium, the softened water extends the life of the reverse osmosis membrane.
Сatalog number:
D13321
Barnstead™ Easypure™ RoDi
$0.00
Сatalog number:
062617
Double Softening System WAT
$0.00
For continuous production of softened water. Thermo Scientific™ Double Softening System WAT includes a hardness sensor control that automatically regenerates resin once hardness is detected in one of the two cartridges. This ready-to-connect water softener is for softening feed water before feeding a reverse osmosis system. Water softening removes hard ions, such as calcium and magnesium, and extends the life of the reverse osmosis membrane.
Сatalog number:
50132393
Barnstead™ LabTower™ TII Water Purification System
$0.00 – $20,978.00Price range: $0.00 through $20,978.00
Convert tap water into high-purity water with the Thermo Scientific™ Barnstead™ LabTower™ TII Water Purification System, a complete solution integrating purification and tank. This high-tech system is designed to continuously recirculate purified reservoir water to preserve water quality even during periods of inactivity. Conserve bench space with this stand-alone design which includes an integrated 100L reservoir. Castors allow for easy relocation within the lab.
Сatalog number:
50131217
Barnstead™ GenPure™
$0.00
Produce Type 1 ultrapure water with consistent quality for your most demanding and sensitive applications with the Thermo Scientific™ Barnstead™ GenPure™ water purification system. This system offers outstanding control, as well as high-precision, USP-complying conductivity measurement with temperature compensation that can be switched on or off. All GenPure™ systems exceed international standard ASTM Type I, ISO 3696 Grade 1, ASTM D1193 and CLSI-CLRW.
Сatalog number:
50146378
Dionex™ IC Pure™ Water Purification System
$0.00 – $7,345.00Price range: $0.00 through $7,345.00
The Thermo Scientific™ Dionex™ IC Pure™ water purification system brings reagent-free ion chromatography to the next level by producing ultrapure water used in the analysis of anions, cations, organic acids, carbohydrates, and amines in water samples. This system has been engineered to remove impurities that threaten your results so you can focus on what is important – the sensitivity and resolution of your ion chromatography analysis. Additionally, the Dionex IC Pure water purification system provides ultrapure water to the entire Dionex RFIC product line.
Сatalog number:
50131323
Barnstead™ GenPure™ xCAD Water Purification System
$0.00
Reviews
There are no reviews yet.