Features: Each system produces ultrapure water that exceeds the quantitative specifications of Type 1 water as described in ASTM™ D1193, ISO 3696, and CLSI-CLRW. Three cartridges in series provide increased capacity over similar systems. A 0.2μm final filter at the point of use provides water free of particles and bacteria. Quiet pump provides optimal flowrates and silent operation. Standby mode recirculates purified water during inactivity to ensure purity and allows for on-demand use. All components are constructed of inert materials, ensuring maximum ionic and organic purity. Supplied wall bracket allows increased flexibility when choosing a location. Integral low water and low pressure pump protectors protect the pump in the event feedwater is interrupted to the system. Easypure II: Base unit For buffer prep, titration, solutions, AA TOC 5 to 10ppb Easypure II UV: Ultralow organics For HPLC, TOC, GC/MS TOC 1 to 5ppb Easypure II UFI: Eliminates pyrogens For cell and tissue culture, monoclonal antibody production, electrophoresis TOC 5 to 10ppb Easypure II UV: Lowest levels of organics, pyrogens and nucleases For PCR 2-D electrophoresis, cell culture, blotting TOC 1 to 5ppb Ordering Information: Optional accessories include Remote Dispenser (0903515) and replacement consumables (UV lamps, ultrafilters and cleaning syringe); order separately. Contact your Sales Representative for details. Includes: Wall mounting bracket, cleaning syringe, UV lamp (Easypure II UV and UV/UF only), ultrafilter (Easypure II UF and UV/UF only). Requires: Cartridges and filters Recommended for: HPLC ICP GC/MS Cell and tissue culture PCR Note: Feedwater must be pre-treated by reverse osmosis, distillation or deionization
Sold out
Barnstead™ Easypure™ II
$0.00
This product has been discontinued. For additional information or alternate products please contact your sales representative. The recommended replacement for this product is
Description
Additional information
| Certifications/Compliance |
CE, CSA |
|---|---|
| Conductivity |
0.055 µS/cm |
| Bacterial Content |
<1 CFU/mL |
| Endotoxin Concentration |
0.001 EU/mL |
| Feed Water Monitoring |
No |
| Feedwater Source |
Pretreated |
| Flow Rate |
Up to 1 L/min., 1 L/min. |
| Product Water Type |
Type 1 |
| Resistivity |
18.2 Mohm.cm at 25°C |
| TOC Monitor with UV Intensity Monitoring |
No |
| Total Organic Carbon |
1 to 5 ppb, 0 to 10 ppb, 5 to 10 ppb |
| Type |
Water Purification System |
| Feedwater Pressure |
100 psig (6.9 bar) |
| Feedwater Temperature (Metric) |
4°C to 40°C |
| Model |
UV/UF model, RF model, RF/UV model, Line feed (LF) model, UV model, UF model |
| Particles >0.2µM/mL |
<1 μM/mL |
| Voltage |
100/240 V |
| Frequency |
50/60 Hz |
| Unit Size |
-, 50/60 Hz |
| Electrical Requirements |
100/240 VAC 50/60 Hz, 100/240 V 50/60 Hz |
Reviews (0)
Shipping & Delivery
Related products
Сatalog number:
50136172
Barnstead™ GenPure™ xCAD Plus Ultrapure Water Purification System
Gain flexibility in the lab with the Thermo Scientific™ Barnstead™ GenPure™ xCAD Plus Ultrapure Water Purification System. Its advanced technologies allow for simultaneous dispensing from up to three remote dispensers for ease of use in shared laboratory environments. This lab water system comes with leak detection, electronic dispensing for fully automatic volume control and feed water monitoring that alerts users to fluctuations in the feed water quality. All consumables needed for start-up come with the system, allowing for simple ordering and setup.
Сatalog number:
50157375
Point of Dispense Filters for Barnstead™ Point of Use Water Purification Systems
Сatalog number:
D12671
Barnstead™ RO System
Сatalog number:
50132132
Barnstead™ Pacific TII Water Purification System
Convert tap water into Type 2, high purity water with the automatic and cost-efficient Thermo Scientific™ Barnstead™ Pacific TII Water Purification System. This system supports daily requirements from 20 to 200 liters. It removes approximately 98% of inorganic ions and 99% of all dissolved organic substances, as well as microorganisms and particles, with its high performance, reverse osmosis membrane.
Сatalog number:
50131952
Barnstead™ GenPure™ Pro Water Purification System
Produce Type 1 ultrapure water while conserving space with the compact and flexible Thermo Scientific™ Barnstead™ GenPure™ Pro Water Purification System. Suitable for the most demanding laboratory applications, this system delivers 18.2 megohm-cm water with consistent quality. Gain flexibility with the dispenser that reaches up to 24″ (60cm) from the unit. It can be used on a laboratory bench or on a wall. Integrated feed water monitoring helps to maximize cartridge life. Easily change cartridges within seconds with Aquastop quick-connects.
Сatalog number:
D4642-33
Barnstead™ E-Pure™ Ultrapure Water Purification Systems
Produce Type 1 ultrapure water with low operating costs using Thermo Scientific™ Barnstead™ E-Pure™ Ultrapure Water Purification Systems. Choose from a three- or four-module system. Gain longer cartridge life and benefit from lower operating costs with large cartridges. This system is Ideal for AA, GS, buffer preps, or as a purified feed water source for analytical instruments or labware washers. It is simple to use and easy to maintain.
Сatalog number:
061206
Double Softening System WMS
Monitor total water processed using the electronic volume control featured in Thermo Scientific™ Double Softening System WMS. Once the limit is reached, the system will automatically regenerate. This is ideal when a continuous supply of softened water is required, such as for larger systems or clinical feed water systems. This ready-to-connect water softener is for softening feed water before feeding a reverse osmosis system. Water softening removes hard ions, such as calcium and magnesium, extending the life of the reverse osmosis membrane.
Сatalog number:
50132389
Reviews
There are no reviews yet.