Optimize your water purification system with Thermo Scientific™ Barnstead™ RO and TII Accessories and Consumables. For use with Barnstead RO and TII water purification systems, these products include filters and pre-filters, cartridges, overflow cutoff float and pump interlock cable, as well as dispensers and printer.
Sold out
Barnstead™ RO and TII Accessories and Consumables
Price range: $0.00 through $1,267.00
Optimize your water purification system with Thermo Scientific™ Barnstead™ RO and TII Accessories and Consumables. For use with Barnstead RO and TII water purification systems, these products include filters and pre-filters, cartridges, overflow cutoff float and pump interlock cable, as well as dispensers and printer.
Description
Additional information
| Conductivity |
0.055 µS/cm |
|---|---|
| Bacterial Content |
<1 CFU/mL |
| Feed Water Monitoring |
No |
| Feedwater Source |
Pretreated |
| Product Water Type |
Type 2 |
| Resistivity |
15 Mohm.cm at 25°C |
| TOC Monitor with UV Intensity Monitoring |
No |
| Total Organic Carbon |
1 to 5 ppb |
| Type |
UV Lamp for Storage Reservoir, Ultrapure Filter, 1/2 Size, Filter, 0.22 Micron, Oxygen Filter, Control Panel Mounting Assembly, Dispense Overflow Cutoff Float, Pump Interlock Cable, Remote Dispenser, Volumetric Remote Dispenser, Pre-filter |
| Feedwater Pressure |
30 to 100 psig (2 to 6.9 bar) |
| Feedwater Temperature (Metric) |
4°C to 40°C |
| For Use With (Equipment) |
Barnstead™ TII Type 2 Water System, Barnstead Water Purification Systems, Barnstead RO, Barnstead TII, Barnstead RO, Barnstead TII |
| Particles >0.2µM/mL |
<1 μM/mL |
| Purified Water Flowrate Field |
1 L/min. |
| RO Flow Rate |
12 L/hr. |
| Width (English) |
13.5 in. |
| Height (English) |
19.5 in. |
| Height (Metric) |
49.5 cm |
| Depth (English) |
18.5 in. |
| Depth (Metric) |
47 cm |
| Electrical Requirements |
100/240 VAC 50/60 Hz |
| Unit Size |
Each, Each |
Reviews (0)
Shipping & Delivery
Related products
Сatalog number:
D12671
Barnstead™ RO System
Сatalog number:
D8611
Barnstead™ Easypure™ II
Сatalog number:
50136172
Barnstead™ GenPure™ xCAD Plus Ultrapure Water Purification System
Gain flexibility in the lab with the Thermo Scientific™ Barnstead™ GenPure™ xCAD Plus Ultrapure Water Purification System. Its advanced technologies allow for simultaneous dispensing from up to three remote dispensers for ease of use in shared laboratory environments. This lab water system comes with leak detection, electronic dispensing for fully automatic volume control and feed water monitoring that alerts users to fluctuations in the feed water quality. All consumables needed for start-up come with the system, allowing for simple ordering and setup.
Сatalog number:
D14041
Barnstead™ TII Type 2 Water System
Сatalog number:
50146378
Dionex™ IC Pure™ Water Purification System
The Thermo Scientific™ Dionex™ IC Pure™ water purification system brings reagent-free ion chromatography to the next level by producing ultrapure water used in the analysis of anions, cations, organic acids, carbohydrates, and amines in water samples. This system has been engineered to remove impurities that threaten your results so you can focus on what is important – the sensitivity and resolution of your ion chromatography analysis. Additionally, the Dionex IC Pure water purification system provides ultrapure water to the entire Dionex RFIC product line.
Сatalog number:
50157882
Barnstead™ Smart2Pure™ Pro Water Purification System
Сatalog number:
061206
Double Softening System WMS
Monitor total water processed using the electronic volume control featured in Thermo Scientific™ Double Softening System WMS. Once the limit is reached, the system will automatically regenerate. This is ideal when a continuous supply of softened water is required, such as for larger systems or clinical feed water systems. This ready-to-connect water softener is for softening feed water before feeding a reverse osmosis system. Water softening removes hard ions, such as calcium and magnesium, extending the life of the reverse osmosis membrane.
Сatalog number:
062617
Double Softening System WAT
For continuous production of softened water. Thermo Scientific™ Double Softening System WAT includes a hardness sensor control that automatically regenerates resin once hardness is detected in one of the two cartridges. This ready-to-connect water softener is for softening feed water before feeding a reverse osmosis system. Water softening removes hard ions, such as calcium and magnesium, and extends the life of the reverse osmosis membrane.
Reviews
There are no reviews yet.