Multiple Options for Type 2 water: Five system options with permeate flows of 3, 7, 12, 20 or 40L/hr Future system upgrades accommodate greater capacities to meet growing water demands Space-saving design permits benchtop installation or wall mounting with integrated mounting bracket Operational Reliability: Microprocessor controlled for automatic operation with continuous monitoring of all critical parameters Automatic return to “operating” mode ensures recirculation during standstill periods UV lamp prevents biological contamination (UV models only) Easy-to-Operate: Resistivity/conductivity clearly displayed on large, back-lit control panel that tilts for optimum viewing Status of current operating mode clearly indicating Production , Stand-by and Cleaning modes Reservoir fill-level shown as % System parameters are code-protected to prevent accidental changes to set points GLP-Compliant Documentation: Optional printer connects to RS-232 port for data recording and traceability Cell constant of 0.01cm -1 ensures precise conductivity measurements Temperature compensation for the conductivity measurement has an accuracy of ±0.1°C (in conformity with USP 645) Optional Hand Dispenser: Gain increased flexibility by adding a hand dispenser with 3-meter cord which connects to tank; use only with a tank equipped with a pressure pump (06.5032, 06.5062, 06.5082). Ships with a 0.2 micron final filter (Part #50138221) Warranty :1 year, parts and labor
Sold out
Barnstead™ Pacific TII Water Purification System
$0.00 – $11,670.00
Convert tap water into Type 2, high purity water with the automatic and cost-efficient Thermo Scientific™ Barnstead™ Pacific TII Water Purification System. This system supports daily requirements from 20 to 200 liters. It removes approximately 98% of inorganic ions and 99% of all dissolved organic substances, as well as microorganisms and particles, with its high performance, reverse osmosis membrane.
Description
Additional information
| Bacterial retention |
99% |
|---|---|
| Conductivity |
0.1 to 1.0μS/cm |
| Bacterial Content |
99% |
| Daily Output |
20 to 200 L |
| Feedwater Connector |
3/4 in. NPT |
| Feed Water Monitoring |
No |
| Feedwater Source |
Tap |
| Flow Rate |
12 L/hr. at 10°C, 20 L/hr. at 10°C, 7 L/hr. at 10°C |
| Product Water Type |
Type 2 |
| Resistivity |
10 to 1 Mohm.cm at 25°C |
| TOC Monitor with UV Intensity Monitoring |
No |
| Total Organic Carbon |
<30 ppb |
| Type |
Water Purification System |
| Feedwater Pressure |
1 to 6 bar |
| Operating Pressure |
2 to 6 bar |
| Particles >0.2µM/mL |
<1 μM/mL |
| Temperature Range (Metric) |
2°C to 35°C |
| Width (Metric) |
372 mm |
| Height (Metric) |
613 mm, 372 mm |
| Depth (Metric) |
330 mm |
| Net Weight (Metric) |
25 kg |
Reviews (0)
Shipping & Delivery
Related products
Сatalog number:
D4642-33
Barnstead™ E-Pure™ Ultrapure Water Purification Systems
Produce Type 1 ultrapure water with low operating costs using Thermo Scientific™ Barnstead™ E-Pure™ Ultrapure Water Purification Systems. Choose from a three- or four-module system. Gain longer cartridge life and benefit from lower operating costs with large cartridges. This system is Ideal for AA, GS, buffer preps, or as a purified feed water source for analytical instruments or labware washers. It is simple to use and easy to maintain.
Сatalog number:
50157882
Barnstead™ Smart2Pure™ Pro Water Purification System
Сatalog number:
50132389
Barnstead™ Pacific™ RO Water Purification System
Сatalog number:
061278
Cabinet Softening System WAE
Single softening cabinet systems have time control and are specially designed for discontinuous use. Ideal for laboratory point-of-use water purification systems, the Thermo Scientific™ Cabinet Softening System WAE is ready-to-connect, and softens feed water before feeding a reverse osmosis system. By removing hard ions, such as calcium and magnesium, the softened water extends the life of the reverse osmosis membrane.
Сatalog number:
D13321
Barnstead™ Easypure™ RoDi
Сatalog number:
062617
Double Softening System WAT
For continuous production of softened water. Thermo Scientific™ Double Softening System WAT includes a hardness sensor control that automatically regenerates resin once hardness is detected in one of the two cartridges. This ready-to-connect water softener is for softening feed water before feeding a reverse osmosis system. Water softening removes hard ions, such as calcium and magnesium, and extends the life of the reverse osmosis membrane.
Сatalog number:
50131952
Barnstead™ GenPure™ Pro Water Purification System
Produce Type 1 ultrapure water while conserving space with the compact and flexible Thermo Scientific™ Barnstead™ GenPure™ Pro Water Purification System. Suitable for the most demanding laboratory applications, this system delivers 18.2 megohm-cm water with consistent quality. Gain flexibility with the dispenser that reaches up to 24″ (60cm) from the unit. It can be used on a laboratory bench or on a wall. Integrated feed water monitoring helps to maximize cartridge life. Easily change cartridges within seconds with Aquastop quick-connects.
Сatalog number:
50129890
Barnstead™ Smart2Pure™ Water Purification System
Convert tap water to ASTM Type 1 water with the compact, all-in-one Thermo Scientific™ Barnstead™ Smart2Pure™ Water Purification System. This complete system produces 3 or 6 liters of ultrapure water per hour. The Smart2Pure 3 and 6 feature a built-in 6L reservoir, while the Smart2Pure 12 offers the choice of a 30L or 60L reservoir for customizable storage capacity. Dispensing is easy and features variable speed to control flow. The display can be tilted for optimal reading. Position this system on the bench or mount on the wall.
Reviews
There are no reviews yet.