Transform tap water into ultrapure water in the compact, fully automatic Thermo Scientific™ Barnstead™ Easypure™ RoDi water purification system. Automatic operation dispenses purified water on demand for a wide range of critical applications. It is easy to use and comes standard with a UV lamp, producing water with ultra low levels of organics. Features: Produces up to 15L/day of ultrapure water that exceeds Type 1 water specifications as per ASTM™ D1193, ISO 3696 and CLSI-CLRW Continuous water recirculation between reservoir, cartridges and UV lamp ensures consistent availability of highest purity water Microprocessor-controlled purity monitor provides a digital reading as the water exits the system Monitor alerts user to vital information including membrane performance and when to replace consumables 6.5L noncontaminating internal reservoir incorporates air filter to prevent stored water contamination Quiet pump provides optimal flowrates and silent operation Integral low-water and low-pressure pump protection ensures pump safety in the event there is insufficient water during storage Ordering Information: Optional accessories include External Boost Pump (1393583), Wall Mounting Bracket (1393585) and Pre-Filtration Accessory Kit (1393584). These and replacement consumables are sold separately. Contact your Sales Representative for details. Includes: Thermo Scientific™ Ventgard™ Reservoir Cap UV lamp Requires: Start-Up Kit (1393581) and Set of 3 Empty Cartridges (9828235CN; necessary for cleaning) to be ordered separately. Recommended for: HPLC ICP GC/MS AA
Back to products
Barnstead™ RO and TII Accessories and Consumables
$0.00 – $1,267.00
Barnstead™ Easypure™ RoDi
$0.00
This item is no longer available and has been replaced by the next generation of Barnstead Water Purification Systems. The recommended replacement for this product is
Description
Additional information
| Bacterial retention |
99% |
|---|---|
| Certifications/Compliance |
ASTM™ D1193, ISO 3696 and CLSI-CLRW. CE, CSA |
| Conductivity |
0.055 µS/cm |
| Bacterial Content |
<1 CFU/mL |
| Daily Output |
Up to 15 L/Day |
| Feed Water Monitoring |
No |
| Feedwater Source |
Tap |
| Flow Rate |
0.8 L/min. |
| Product Water Type |
Type 1 |
| Resistivity |
18.2 Mohm.cm at 25°C |
| TOC Monitor with UV Intensity Monitoring |
No |
| Total Organic Carbon |
1 to 5 ppb |
| Type |
Water Purification System |
| Feedwater Pressure |
30 to 100 psig (2 to 6.9 bar) |
| Feedwater Temperature (Metric) |
4°C to 40°C |
| Particles >0.2µM/mL |
<1 μM/mL |
| Width (Metric) |
30.5 cm |
| Height (English) |
18 in. |
| Height (Metric) |
45.7 cm |
| Depth (English) |
19 in. |
| Depth (Metric) |
48.3 cm |
Reviews (0)
Shipping & Delivery
Related products
Сatalog number:
50132389
Barnstead™ Pacific™ RO Water Purification System
Сatalog number:
50146378
Dionex™ IC Pure™ Water Purification System
The Thermo Scientific™ Dionex™ IC Pure™ water purification system brings reagent-free ion chromatography to the next level by producing ultrapure water used in the analysis of anions, cations, organic acids, carbohydrates, and amines in water samples. This system has been engineered to remove impurities that threaten your results so you can focus on what is important – the sensitivity and resolution of your ion chromatography analysis. Additionally, the Dionex IC Pure water purification system provides ultrapure water to the entire Dionex RFIC product line.
Сatalog number:
50136172
Barnstead™ GenPure™ xCAD Plus Ultrapure Water Purification System
Gain flexibility in the lab with the Thermo Scientific™ Barnstead™ GenPure™ xCAD Plus Ultrapure Water Purification System. Its advanced technologies allow for simultaneous dispensing from up to three remote dispensers for ease of use in shared laboratory environments. This lab water system comes with leak detection, electronic dispensing for fully automatic volume control and feed water monitoring that alerts users to fluctuations in the feed water quality. All consumables needed for start-up come with the system, allowing for simple ordering and setup.
Сatalog number:
50131323
Barnstead™ GenPure™ xCAD Water Purification System
Сatalog number:
07.3900-EDI
Reverse Osmosis EDI Systems (600 – 1200L/hr)
Сatalog number:
AY1406X3
Accessories for the Barnstead™ TII Type 2 Water System
Сatalog number:
50132396
Barnstead™ LabTower™ EDI Water Purification System
Stock high purity water safely and conveniently with the integrated 100L reservoir of the Thermo Scientific™ Barnstead™ LabTower™ EDI Water Purification System. This system combines purification with EDI technology and storage in one. Conveniently dispense Type 1 water directly from the system while Type 2 water is accessible from the reservoir, an ideal supply for lab equipment. Free up bench space with this mobile free-standing unit that can be easily relocated with bottom-mounted rollers.
Сatalog number:
50132374
Barnstead™ MicroPure™ Water Purification System
Process up to 15L/day of ultra-pure water with the compact and reliable Thermo Scientific™ Barnstead™ MicroPure™ Water Purification System. This system is an outstanding choice for applications such as HPLC or other instrumental analyses, sample preparation, glassware rinsing or molecular biology work in which endotoxins and/or nucleases would interfere. Place the system without direct access to a water line with the optional integrated 6L feed water reservoir and easily view the screen with backlit tiltable display. Monitor feed water quality to help maximize cartridge life.
Reviews
There are no reviews yet.