Features: System achieves resistivities up to 18.2 MΩ-cm and TOC levels below 10ppb. Virgin polypropylene water pathways prevent recontamination. Recirculation pump continuously recirculates water throughout the entire system to maintain water purity and reduce the quantity of wastewater required for rinse-up. System is wall-mountable and completely assembled for easy installation. Quarter-turn quick release canisters allow for easy cartridge replacement. 0.2μm absolute final filter removes bacteria and particulates that could alter your results. Digital resistivity meter is automatically temperature-compensated to 25°C, preventing fluctuating readings due to temperature changes. Ordering Information: Optional accessories include Remote Dispenser (D8952), Low Pressure Pump Protector (D2706), and Low Water Level Pump Protector (D0603, D0606). These products, as well as replacement cartridges and consumables, are available separately. For details, contact your sales representative. Includes: Wall bracket Requires: O-rings included with cartridge pack (sold separately) Recommended for: AA, GS, buffer preps, feedwater for analytical instruments or labware washers Note: If feeding E-Pure from a storage reservoir, Low Water Pump Protector is recommended to protect pump from damage if reservoir water level falls below system requirements. Order separately (D0603 for 120V, D0606 for 240V).
Sold out
Barnstead™ GenPure™
$0.00
SureSTART™ 11 mm Crimp Caps, Level 2 High-throughput Applications
$18.56 – $1,576.85
Barnstead™ E-Pure™ Ultrapure Water Purification Systems
$0.00 – $6,349.00
Produce Type 1 ultrapure water with low operating costs using Thermo Scientific™ Barnstead™ E-Pure™ Ultrapure Water Purification Systems. Choose from a three- or four-module system. Gain longer cartridge life and benefit from lower operating costs with large cartridges. This system is Ideal for AA, GS, buffer preps, or as a purified feed water source for analytical instruments or labware washers. It is simple to use and easy to maintain.
Description
Additional information
| Certifications/Compliance |
CE, CSA |
|---|---|
| Conductivity |
0.055μS/cm, Type 1: 0.055μS/cm, Type 2: 0.067 to 0.1μS/cm |
| Bacterial Content |
<1 CFU/mL |
| Feed Water Monitoring |
No |
| Feedwater Source |
Tap or Pretreated |
| Flow Rate |
Up to 2.5 L/min. |
| Product Water Type |
Type 1 |
| Remote Dispenser |
Optional |
| Resistivity |
18.2 Mohm.cm at 25°C |
| TOC Monitor with UV Intensity Monitoring |
No |
| Total Organic Carbon |
<10 ppb |
| Type |
Water Purification System |
| Feedwater Pressure |
100 psig (6.9 bar) |
| Modules |
4, 3 |
| Particles >0.2µM/mL |
<1 μM/mL |
| Dimensions (L x W x H) |
7.5 x 37.5 x 28 in. (19 x 95.3 x 71.1 cm), 7.5 x 31.5 x 28 in. (19 x 80.0 x 71.1 cm) |
| Length (English) |
7.5 in. |
| Width (English) |
37.5 in., 31.5 in. |
| Width (Metric) |
95.3 cm, 80.0 cm |
| Height (English) |
28 in., 80.0 cm, 95.3 cm |
| Height (Metric) |
71.1 cm |
| Voltage |
240 V |
Reviews (0)
Shipping & Delivery
Related products
Сatalog number:
LMX31
Barnstead™ RO and TII Accessories and Consumables
Optimize your water purification system with Thermo Scientific™ Barnstead™ RO and TII Accessories and Consumables. For use with Barnstead RO and TII water purification systems, these products include filters and pre-filters, cartridges, overflow cutoff float and pump interlock cable, as well as dispensers and printer.
Сatalog number:
50157886
Barnstead™ Pretreatment for Point of Use Water Purification Systems
Сatalog number:
061278
Cabinet Softening System WAE
Single softening cabinet systems have time control and are specially designed for discontinuous use. Ideal for laboratory point-of-use water purification systems, the Thermo Scientific™ Cabinet Softening System WAE is ready-to-connect, and softens feed water before feeding a reverse osmosis system. By removing hard ions, such as calcium and magnesium, the softened water extends the life of the reverse osmosis membrane.
Сatalog number:
50136172
Barnstead™ GenPure™ xCAD Plus Ultrapure Water Purification System
Gain flexibility in the lab with the Thermo Scientific™ Barnstead™ GenPure™ xCAD Plus Ultrapure Water Purification System. Its advanced technologies allow for simultaneous dispensing from up to three remote dispensers for ease of use in shared laboratory environments. This lab water system comes with leak detection, electronic dispensing for fully automatic volume control and feed water monitoring that alerts users to fluctuations in the feed water quality. All consumables needed for start-up come with the system, allowing for simple ordering and setup.
Сatalog number:
AY1406X3
Accessories for the Barnstead™ TII Type 2 Water System
Сatalog number:
D8611
Barnstead™ Easypure™ II
Сatalog number:
50129890
Barnstead™ Smart2Pure™ Water Purification System
Convert tap water to ASTM Type 1 water with the compact, all-in-one Thermo Scientific™ Barnstead™ Smart2Pure™ Water Purification System. This complete system produces 3 or 6 liters of ultrapure water per hour. The Smart2Pure 3 and 6 feature a built-in 6L reservoir, while the Smart2Pure 12 offers the choice of a 30L or 60L reservoir for customizable storage capacity. Dispensing is easy and features variable speed to control flow. The display can be tilted for optimal reading. Position this system on the bench or mount on the wall.
Сatalog number:
50146378
Dionex™ IC Pure™ Water Purification System
The Thermo Scientific™ Dionex™ IC Pure™ water purification system brings reagent-free ion chromatography to the next level by producing ultrapure water used in the analysis of anions, cations, organic acids, carbohydrates, and amines in water samples. This system has been engineered to remove impurities that threaten your results so you can focus on what is important – the sensitivity and resolution of your ion chromatography analysis. Additionally, the Dionex IC Pure water purification system provides ultrapure water to the entire Dionex RFIC product line.
Reviews
There are no reviews yet.