The adapters enable rotor to accept bottles up to 250mL and tubes to 100mL. Maximum adapter capacity: 4 × 250mL (4 × 400mL with 400mL polypropylene bio-bottles) Maximum adapter O.D. × L: 62 × 125mm (80 × 125mm with 400mL bio-bottles)
Sold out
TX-400 Rotor Adapters
Use Thermo Scientificâ„¢ TX-400 Adapters with round buckets in the TX-400 Rotor.
Description
Additional information
| Type |
Rotor Adapter |
|---|---|
| Tube Type |
175, 200, 225, 250 mL Bottle, Conical |
| Capacity |
175, 200, 225, 250 mL, 15 mL, 50 mL |
| Max. Tube Diameter |
62 mm, 16.5 mm, 29.5 mm |
| Max. Tube Length |
125 mm, 121 mm, 116 mm |
| No. per Pack |
4 |
| Unit Size |
Pack of 4 |
| Tube Size |
15 mL, 50 mL |
Reviews (0)
Shipping & Delivery
Related products
Сatalog number:
75100378
Fiberliteâ„¢ Rotor Adapters
Сatalog number:
3650-0050PK
Nalgeneâ„¢ Acrylic Burets with PMP Tip, TFE Stopcock and Plug
Ensure repeatable, accurate results with Thermo Scientific™ Nalgene™ Break-Resistant Acrylic Burets which meet ASTM E287 standards. These Acrylic burets are crystal clear, durable, easy to use and safer than glass. Avoid chips, broken tips, and sharp edges. Enjoy safer and easier handling with durable acrylic instead of glass.
Сatalog number:
11172596
CLINIConicâ„¢ Rotor Adapters
Сatalog number:
75005756
1.5/2mL Microtube Adapter
Сatalog number:
11172288
TX-100/100S Clinical Swinging Bucket Rotor Adapters
Сatalog number:
377585
Nuncâ„¢ Centrifuge Bottle Adapters and Cushions
Increase the functionality of lab equipment with Thermo Scientificâ„¢ Nuncâ„¢ Centrifuge Bottle Adapters/Cushions, which are tightness tested, fit most centrifuges and meet USP Class VI. Nunc products are high-quality plastics for use in biotechnology, pharmaceutical and research laboratories, as well as in the production of vaccines and diagnostic kits.
Сatalog number:
BRIDGE8
Bridge8 Transducer Amplifier Module
Low noise transducer amplifier in a modular system
Bridge8 is a modular, rack-mountable amplifier system. It is specifically designed for use as a signal conditioning amplifier with strain gages and other poered transducers. Bridge8 includes differential amplifiers featuring high input impedance, high common mode rejection and low current leakage input terminals for low noise operation. The Bridge8 also features a half bridge switch and channel offset. A wide variety of WPI transducers are available for force, temperature, pressure and light measurements. The Bridge8 amplifier is a clear choice for convenience and quality. Any combination of ISO-DAM8 or Bridge8 modules may be combined in the same enclosure. The ISO-DAM8A module is also available in this rack configuration.
Сatalog number:
SYS-TBM4M
Reviews
There are no reviews yet.