Intelligent Controls: Automate operation, monitor system performance and pressure Display key data including membrane performance, reservoir level and cartridge status Monitor incoming water and membrane pressure and indicate when prefilter must be changed Simple Operation and Maintenance: Delivers multistep purification in a single system Includes all required components Technology Innovations: Composite polyamide RO membranes Unique MPS that protects membranes from surface scale buildup, eliminates need for softening and extends membrane life Automatic flush that cleans RO membrane(s) to help eliminate buildup of scale on membrane and extends membrane life Compact, Flexible and Quiet: Small footprint fits any size lab and features convenient wall- or bench-mounting. Wall bracket is included with system. Optional Remote Mounting Control Panel enables placement up to 10′ (3m) away. 12 and 24L/hr. systems include silent-running pump. 6L/hr. system uses available in-house line pressure. Includes: Prefilter MPS cartridge Extruded carbon filter RO membrane (two supplied with D12661) Wall bracket Recommended for: Buffer/reagent prep Glassware washing Type 1 water system feed General lab use Ordering Information: Optional accessories include Remote Control Mounting Panel (AY1265X1) and Hot/Cold Mixing Valve (D7427). These products and replacement consumables are sold separately; contact your Sales Representative for details. Requires: Tank, sold separately. Contact your sales representative for details.
Sold out
Barnstead™ RO System
This product has been discontinued. For additional information or alternate products please contact your sales representative. The recommended replacement for this product is the
Description
Additional information
| Bacterial Content |
99% |
|---|---|
| Certifications/Compliance |
CE, CSA |
| Chlorine Tolerance |
1000 ppm/hr. |
| Contaminant Rejection (Microbiological) |
99% |
| Contaminant Rejection (Minimum Ionic) |
Monovalent: 90 to 95%; Polyvalent: 95 to 99 |
| Contaminant Rejection (Organic) |
99% |
| Contaminant Rejection (Particulate) |
90 to 95% |
| Feed Water Monitoring |
No |
| Feedwater Source |
Tap |
| Flow Rate |
6 L/hr., 12 L/hr., 24 L/hr. |
| Product Water Type |
Ultrapure (Type 1) |
| TOC Monitor with UV Intensity Monitoring |
No |
| Type |
Reverse Osmosis System |
| Feedwater Pressure |
30 to 100 psig (2 to 6.9 bar) |
| Iron Total as Fe |
<0.5ppm |
| Max. TDS as CaCO3 |
800 ppm |
| Particles >0.2µM/mL |
<1 μM/mL |
| Resistivity |
18.2MΩ·cm |
| Silica |
<30ppm |
| Silt Density Index |
<5%, <30ppm |
| Temperature Range (English) |
34°F to 95°F |
| Temperature Range (Metric) |
1°C to 35°C |
Reviews (0)
Shipping & Delivery
Related products
Сatalog number:
061206
Double Softening System WMS
Monitor total water processed using the electronic volume control featured in Thermo Scientific™ Double Softening System WMS. Once the limit is reached, the system will automatically regenerate. This is ideal when a continuous supply of softened water is required, such as for larger systems or clinical feed water systems. This ready-to-connect water softener is for softening feed water before feeding a reverse osmosis system. Water softening removes hard ions, such as calcium and magnesium, extending the life of the reverse osmosis membrane.
Сatalog number:
D4642-33
Barnstead™ E-Pure™ Ultrapure Water Purification Systems
Produce Type 1 ultrapure water with low operating costs using Thermo Scientific™ Barnstead™ E-Pure™ Ultrapure Water Purification Systems. Choose from a three- or four-module system. Gain longer cartridge life and benefit from lower operating costs with large cartridges. This system is Ideal for AA, GS, buffer preps, or as a purified feed water source for analytical instruments or labware washers. It is simple to use and easy to maintain.
Сatalog number:
AY1406X3
Accessories for the Barnstead™ TII Type 2 Water System
Сatalog number:
50155482
Reverse Osmosis Systems RO 100-350 RDS
Produce product water that is less than 0.1µS/cm. Thermo Scientific™ Reverse Osmosis RO 100-350 RDS systems features an integrated ion exchanger, storage tank and pressure pump in a dust-proof cabinet. These systems are ideal supplier of high purity water for analyzers, as well as for general laboratory purposes according to international quality-standards like CLSI. The quality of the high purity water supplied by reverse osmosis is not sufficient when a conductivity below 1μS/cm is required. For such cases, the combination of reverse osmosis with ion exchanger is necessary.
Сatalog number:
D11971
Barnstead™ Nanopure™
Сatalog number:
061278
Cabinet Softening System WAE
Single softening cabinet systems have time control and are specially designed for discontinuous use. Ideal for laboratory point-of-use water purification systems, the Thermo Scientific™ Cabinet Softening System WAE is ready-to-connect, and softens feed water before feeding a reverse osmosis system. By removing hard ions, such as calcium and magnesium, the softened water extends the life of the reverse osmosis membrane.
Сatalog number:
50132374
Barnstead™ MicroPure™ Water Purification System
Process up to 15L/day of ultra-pure water with the compact and reliable Thermo Scientific™ Barnstead™ MicroPure™ Water Purification System. This system is an outstanding choice for applications such as HPLC or other instrumental analyses, sample preparation, glassware rinsing or molecular biology work in which endotoxins and/or nucleases would interfere. Place the system without direct access to a water line with the optional integrated 6L feed water reservoir and easily view the screen with backlit tiltable display. Monitor feed water quality to help maximize cartridge life.
Сatalog number:
50132391
Barnstead™ LabTower™ RO Water Purification System
Convert tap water into reverse osmosis (RO) water with integrated 100L storage using the Thermo Scientific™ Barnstead™ LabTower™ RO Water Purification System, which allows the user to easily read parameters with an ultra-modern controller. Mounted on casters, this compact system is an ideal pure water supply for any laboratory. The system is well-suited as a feed water source for dishwashers, autoclaves and general laboratory use. Choose from two system options with permeate flows of 20, 49 or 60L/hr. Resistivity/conductivity is clearly displayed on a large back-lit control panel that tilts for optimum viewing.
Reviews
There are no reviews yet.