Multiple Options for Type 2 water: Five system options with permeate flows of 3, 7, 12, 20 or 40L/hr Future system upgrades accommodate greater capacities to meet growing water demands Space-saving design permits benchtop installation or wall mounting with integrated mounting bracket Operational Reliability: Microprocessor controlled for automatic operation with continuous monitoring of all critical parameters Automatic return to “operating” mode ensures recirculation during standstill periods UV lamp prevents biological contamination (UV models only) Easy-to-Operate: Resistivity/conductivity clearly displayed on large, back-lit control panel that tilts for optimum viewing Status of current operating mode clearly indicating Production , Stand-by and Cleaning modes Reservoir fill-level shown as % System parameters are code-protected to prevent accidental changes to set points GLP-Compliant Documentation: Optional printer connects to RS-232 port for data recording and traceability Cell constant of 0.01cm -1 ensures precise conductivity measurements Temperature compensation for the conductivity measurement has an accuracy of ±0.1°C (in conformity with USP 645) Optional Hand Dispenser: Gain increased flexibility by adding a hand dispenser with 3-meter cord which connects to tank; use only with a tank equipped with a pressure pump (06.5032, 06.5062, 06.5082). Ships with a 0.2 micron final filter (Part #50138221) Warranty :1 year, parts and labor
Sold out
Barnstead™ Pacific TII Water Purification System
Convert tap water into Type 2, high purity water with the automatic and cost-efficient Thermo Scientific™ Barnstead™ Pacific TII Water Purification System. This system supports daily requirements from 20 to 200 liters. It removes approximately 98% of inorganic ions and 99% of all dissolved organic substances, as well as microorganisms and particles, with its high performance, reverse osmosis membrane.
Description
Additional information
| Bacterial retention |
99% |
|---|---|
| Conductivity |
0.1 to 1.0μS/cm |
| Bacterial Content |
99% |
| Daily Output |
20 to 200 L |
| Feedwater Connector |
3/4 in. NPT |
| Feed Water Monitoring |
No |
| Feedwater Source |
Tap |
| Flow Rate |
12 L/hr. at 10°C, 20 L/hr. at 10°C, 7 L/hr. at 10°C |
| Product Water Type |
Type 2 |
| Resistivity |
10 to 1 Mohm.cm at 25°C |
| TOC Monitor with UV Intensity Monitoring |
No |
| Total Organic Carbon |
<30 ppb |
| Type |
Water Purification System |
| Feedwater Pressure |
1 to 6 bar |
| Operating Pressure |
2 to 6 bar |
| Particles >0.2µM/mL |
<1 μM/mL |
| Temperature Range (Metric) |
2°C to 35°C |
| Width (Metric) |
372 mm |
| Height (Metric) |
613 mm, 372 mm |
| Depth (Metric) |
330 mm |
| Net Weight (Metric) |
25 kg |
Reviews (0)
Shipping & Delivery
Related products
Сatalog number:
50157375
Point of Dispense Filters for Barnstead™ Point of Use Water Purification Systems
Сatalog number:
50157885
Water Purification System Wall Mounting Bracket
Сatalog number:
50132391
Barnstead™ LabTower™ RO Water Purification System
Convert tap water into reverse osmosis (RO) water with integrated 100L storage using the Thermo Scientific™ Barnstead™ LabTower™ RO Water Purification System, which allows the user to easily read parameters with an ultra-modern controller. Mounted on casters, this compact system is an ideal pure water supply for any laboratory. The system is well-suited as a feed water source for dishwashers, autoclaves and general laboratory use. Choose from two system options with permeate flows of 20, 49 or 60L/hr. Resistivity/conductivity is clearly displayed on a large back-lit control panel that tilts for optimum viewing.
Сatalog number:
50157882
Barnstead™ Smart2Pure™ Pro Water Purification System
Сatalog number:
50146378
Dionex™ IC Pure™ Water Purification System
The Thermo Scientific™ Dionex™ IC Pure™ water purification system brings reagent-free ion chromatography to the next level by producing ultrapure water used in the analysis of anions, cations, organic acids, carbohydrates, and amines in water samples. This system has been engineered to remove impurities that threaten your results so you can focus on what is important – the sensitivity and resolution of your ion chromatography analysis. Additionally, the Dionex IC Pure water purification system provides ultrapure water to the entire Dionex RFIC product line.
Сatalog number:
061206
Double Softening System WMS
Monitor total water processed using the electronic volume control featured in Thermo Scientific™ Double Softening System WMS. Once the limit is reached, the system will automatically regenerate. This is ideal when a continuous supply of softened water is required, such as for larger systems or clinical feed water systems. This ready-to-connect water softener is for softening feed water before feeding a reverse osmosis system. Water softening removes hard ions, such as calcium and magnesium, extending the life of the reverse osmosis membrane.
Сatalog number:
D13321
Barnstead™ Easypure™ RoDi
Сatalog number:
061278
Cabinet Softening System WAE
Single softening cabinet systems have time control and are specially designed for discontinuous use. Ideal for laboratory point-of-use water purification systems, the Thermo Scientific™ Cabinet Softening System WAE is ready-to-connect, and softens feed water before feeding a reverse osmosis system. By removing hard ions, such as calcium and magnesium, the softened water extends the life of the reverse osmosis membrane.
Reviews
There are no reviews yet.