Legend T/RT and Stratos: 75003334 and 75003046 Primo/Primo R: 75007590 Accommodate tube sizes from 1.5 to 50mL
Sold out
Sorvall™ Tube Adapters for Six-Place Fixed-Angle Rotors
Adapt your centrifuge tubes to fit Sorvall Legend™ T/RT, Stratos™ and Primo™/Primo R™ centrifuges with these Sorvall™ Tube Adapters for Six-Place Fixed-Angle Rotors. Select from options to accommodate various tube sizes and shapes from 1.5 to 50mL and round or conical bottoms.
Description
Additional information
| Type |
Fixed Angle Rotor |
|---|---|
| Tube Type |
15mL conical bottom tubes, 12 mL Tube, 38 mL Tube |
| Capacity |
15 mL, 2 x 12 mL, 1 x 38 mL |
| For Use With (Equipment) |
HiGhConic™ 1-place rotor, 6-place Fixed angle rotor |
| Tube Size |
15 mL |
| Unit Size |
Each |
Reviews (0)
Shipping & Delivery
Related products
Sorvall BIOS 16 Adapters
SKU:
75003346
Adapters dedicated to Thermo Scientific Sorvall BIOS 16 centrifuges, dedicated to large volume and bioprocessing applications. These adapters fit into the 2000 mL buckets of the 6x2000 mL rotor (Part Number 75003962) and 2000 mL buckets of the 8x2000 mL rotor (Part number 75003982) equipped with 2000 mL buckets (Part number 75003964). They are available as set of 2 adapters.
Nalgene™ Acrylic Burets with PMP Tip, TFE Stopcock and Plug
SKU:
3650-0050PK
Ensure repeatable, accurate results with Thermo Scientific™ Nalgene™ Break-Resistant Acrylic Burets which meet ASTM E287 standards. These Acrylic burets are crystal clear, durable, easy to use and safer than glass. Avoid chips, broken tips, and sharp edges. Enjoy safer and easier handling with durable acrylic instead of glass.
Bridge8 Transducer Amplifier Module
SKU:
BRIDGE8
Low noise transducer amplifier in a modular system
Bridge8 is a modular, rack-mountable amplifier system. It is specifically designed for use as a signal conditioning amplifier with strain gages and other poered transducers. Bridge8 includes differential amplifiers featuring high input impedance, high common mode rejection and low current leakage input terminals for low noise operation. The Bridge8 also features a half bridge switch and channel offset. A wide variety of WPI transducers are available for force, temperature, pressure and light measurements. The Bridge8 amplifier is a clear choice for convenience and quality. Any combination of ISO-DAM8 or Bridge8 modules may be combined in the same enclosure. The ISO-DAM8A module is also available in this rack configuration.
4-Channel Transducer Amplifier
SKU:
SYS-TBM4M
Amplify output voltage signals
Transbridge (TBM4M) is a four-channel analog transducer manifold, specifically designed to amplify output voltage signals from pressure, force, displacement, and temperature transducers as well as a wide variety of other signal sources. Analog output signals are available from each channel for input to a data acquisition system for digital signal processing in a computer. Each channel contains a regulated 10 V power supply (+5 and -5 V with respect to signal ground) to provide DC power to transducers, and a precision differential amplifier with selectable voltage amplification and variable position adjustment control.TX-100/100S Clinical Swinging Bucket Rotor Adapters
SKU:
11172288
Fiberlite™ Rotor Adapters
SKU:
75100378
Replacement Stopcock Assembly for Nalgene™ Acrylic Buret
SKU:
713650-1025
Reviews
There are no reviews yet.