Accommodate 50mL Nalgene Oak Ridge tubes in Thermo Scientific™ Fiberlite™ F13-14x50cy or Fiberlite F15-8x50cy rotors.
50mL Nalgene Oak Ridge Tube Adapter
Accommodate 50mL Nalgene Oak Ridge tubes in Thermo Scientific™ Fiberlite™ F13-14x50cy or Fiberlite F15-8x50cy rotors.
Сatalog number:
010-0377
Category: General Purpose Burets
Description
Additional information
Type |
Ridge Tube Adapter |
---|---|
Tube Type |
50 mL Nalgene Oak Ridge Tube |
Capacity |
50 mL |
For Use With (Equipment) |
Fiberlite F13-14x50cy, Fiberlite F15-8x50cy rotors |
Unit Size |
Pack of 2 |
Reviews (0)
Be the first to review “50mL Nalgene Oak Ridge Tube Adapter” Cancel reply
Shipping & Delivery
Related products
Сatalog number:
75003346
Sorvall BIOS 16 Adapters
Adapters dedicated to Thermo Scientific Sorvall BIOS 16 centrifuges, dedicated to large volume and bioprocessing applications. These adapters fit into the 2000 mL buckets of the 6x2000 mL rotor (Part Number 75003962) and 2000 mL buckets of the 8x2000 mL rotor (Part number 75003982) equipped with 2000 mL buckets (Part number 75003964). They are available as set of 2 adapters.
Сatalog number:
00389
10mL Nalgene Oak Ridge Tube or 12mL Round Tube Adapter
Сatalog number:
3650-0050PK
Nalgene™ Acrylic Burets with PMP Tip, TFE Stopcock and Plug
Ensure repeatable, accurate results with Thermo Scientific™ Nalgene™ Break-Resistant Acrylic Burets which meet ASTM E287 standards. These Acrylic burets are crystal clear, durable, easy to use and safer than glass. Avoid chips, broken tips, and sharp edges. Enjoy safer and easier handling with durable acrylic instead of glass.
Сatalog number:
BRIDGE8
Bridge8 Transducer Amplifier Module
Low noise transducer amplifier in a modular system
Bridge8 is a modular, rack-mountable amplifier system. It is specifically designed for use as a signal conditioning amplifier with strain gages and other poered transducers. Bridge8 includes differential amplifiers featuring high input impedance, high common mode rejection and low current leakage input terminals for low noise operation. The Bridge8 also features a half bridge switch and channel offset. A wide variety of WPI transducers are available for force, temperature, pressure and light measurements. The Bridge8 amplifier is a clear choice for convenience and quality. Any combination of ISO-DAM8 or Bridge8 modules may be combined in the same enclosure. The ISO-DAM8A module is also available in this rack configuration.
Сatalog number:
75100378
Reviews
There are no reviews yet.