Buret is durable and unaffected by diluted acids and bases (except hydrofluoric acid and ammonium hydroxide) used as titrants pH range of 1-14 is ideal; compatible with up to 5% wt/wt acids and up to 30% bases accomodating a wide range of tirants Transparent/Graduated Class B, Meet ASTM E287 Replacement stopcock available for 25mL buret only (3650-0025), order item 713650-1025 Not for use with alcohols and organic solvents. Exposure to these solutions will cause immediate damage. .
Nalgene™ Acrylic Burets with PMP Tip, TFE Stopcock and Plug
Ensure repeatable, accurate results with Thermo Scientific™ Nalgene™ Break-Resistant Acrylic Burets which meet ASTM E287 standards. These Acrylic burets are crystal clear, durable, easy to use and safer than glass. Avoid chips, broken tips, and sharp edges. Enjoy safer and easier handling with durable acrylic instead of glass.
SKU:
3650-0050PK
Category: General Purpose Burets
Description
Additional information
| Capacity (Metric) |
50 mL, 25 mL |
|---|---|
| Length (Metric) |
719 mm, 528 mm |
| Material |
Acrylic |
| Graduations |
0.1 mL |
| No. per Pack |
1 |
| No. per Case |
4 |
| Stopcock Material |
PTFE |
| Tolerance |
±0.1 mL, ±0.06 mL |
| Type |
Burette |
| Class |
Class B |
| Certifications/Compliance |
ASTM E287 |
| Unit Size |
Each, Case of 4 |
Reviews (0)
Be the first to review “Nalgene™ Acrylic Burets with PMP Tip, TFE Stopcock and Plug” Cancel reply
Shipping & Delivery
Related products
Adapters for Round Single Blood Bag Buckets for Thermo Scientific™ HAEMAFlex™ 6/8 Rotors
SKU:
75003858
50mL Nalgene Oak Ridge Tube Adapter
SKU:
010-0377
Fiberlite™ Rotor Adapters
SKU:
75100378
Bridge8 Transducer Amplifier Module
SKU:
BRIDGE8
Low noise transducer amplifier in a modular system
Bridge8 is a modular, rack-mountable amplifier system. It is specifically designed for use as a signal conditioning amplifier with strain gages and other poered transducers. Bridge8 includes differential amplifiers featuring high input impedance, high common mode rejection and low current leakage input terminals for low noise operation. The Bridge8 also features a half bridge switch and channel offset. A wide variety of WPI transducers are available for force, temperature, pressure and light measurements. The Bridge8 amplifier is a clear choice for convenience and quality. Any combination of ISO-DAM8 or Bridge8 modules may be combined in the same enclosure. The ISO-DAM8A module is also available in this rack configuration.Sorvall™ Tube Adapters for Six-Place Fixed-Angle Rotors
SKU:
75003095
Adapters for Double Blood Bag Buckets for Thermo Scientific™ HAEMAFlex™ 12/16 Rotors
SKU:
75003868
10mL Nalgene Oak Ridge Tube or 12mL Round Tube Adapter
SKU:
00389

Reviews
There are no reviews yet.